This
automatic sand blasting machine mainly consists of machine body,
workpiece conveying device, spray gun and swing mechanism, compressed
air system, electrical system, cyclone separator and dust collector.
This
machine adopts suction sand blasting, that is, the compressed air flows
at high speed in the spray gun to produce the ejection effect. The
abrasive in the cyclone separator tank is sucked into the spray gun
through the hose, and then the compressed air flow is sprayed from the
nozzle to the surface of the workpiece at high speed. To achieve the
effect of sandblasting.
The sprayed abrasive is returned to the sand
collecting bucket for recycling. The dust generated during the blasting
is extracted by the dust extraction fan of the dust removal box and
separated by the separator. The good abrasive accumulates at the bottom
of the separator and is returned to the sand storage device for
recycling. The dust is separated in two stages and sucked into the
cyclone separator and the dust collecting trolley.
1.
This machine can finish the cleaning of forgings, castings, welding
parts, heat treatment parts, stamping parts, heavy molds and machined
rough surfaces, descaling, residual salts and burrs, and is used for the
pretreatment process before spraying and plating.
2. Also used to spray glass beads and strengthen the surface of decorative parts.
3. Suitable for single and small batch production of medium and small parts.
4.
Suitable for sandblasting of flat plates, plates, tetragons, profiles
and other special-shaped workpieces, such as: flat stainless steel
plates, parallel steel plates, glass steel plates, stone, non-stick
pans, baking pans, toasters, computer cases, Functional DVD panels,
notebooks, computer motherboards, iron soleplates, decorative parts,
sign badges, communication equipment, aluminum plates, profiles and
other shaped parts.
Model | ATS800 Heavy Molds Sand Blasting Machine |
Overall machine dimension(mm) | 1500mm(L)×2500mm(W)×3700mm(H) |
Blasting chamber dimension(mm) | 1500mm(L)×1300mm(W)×800mm(H) |
Max weight of workpieces(kg) | 800kgs |
Quantity of spraying gun(pcs) | 6pcs |
Power supply | 380V/415V/440V 50HZ |
Separator air volume(m3/min) | 10m3/min |
Compressed air source(kg/cm2) | 2~7bar(kg/cm2) flowrate 10~12m3/min |
Noise(dB) | <85dB |
Dust emission(mg) | <0.4mg |
Work temperature range | -10℃/45℃ |
Total power(kw) | 9.5kw |
1. The machine has a novel design, simple and reliable structure, convenient operation, good processing efficiency and low energy consumption.
2. This machine is equipped with a cyclone separator, which can separate the abrasives that can be reused from useless tiny dust. The vacuum cleaner only absorbs the dust, so the consumption of abrasive can be greatly reduced.
3. The main parts of the machine are made of high-quality imported parts, which are safe, reliable and have a long service life.